Cleated Belt

Specifications

• Load: 20 lbs/square foot of belt (90 kg/m2)
• Belt Widths: 6” (152 mm) to 24” (610 mm)
• Lengths: 36” (914 mm) to 40’ (12.2 m)
• Belt speed: 328 ft/min maximum (100 m/min)
• 3.5” (89 mm) diameter drive roller with cast-on Urethane lagging
• UHMW Wear strip bed plate
• Continuous TIG welded 304 stainless steel frame
• Cleat Height available from 11 mm to 60 mm
• #4 Polish on all outside surfaces
• Bearing material is 400 stainless steel
• Bearing lubricant is H1 type FDA lubricant
• FDA approved belting and plastic components

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel

Features & Benefits

• Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10’ (3,048 mm) long consist of multiple sections which are bolted together.
• Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
• Belt tensioning mechanism uses Acme threads for easy cleaning and is externally mounted to the frame with adequate clearances for cleaning.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
• Return Belt Supports are 4″ UHMW Rollers and are easily removed without tools for effective cleaning.
• Drive spindle is Cast-On Urethane Lagging for increased load capacity. Spindle has groove for V-guided belts for optimum performance.
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Belt lifters (optional) lift belt from wear strips / bed plate by simply pulling an external lever for fast access and effective cleaning.